This is the section where we get into the system calls (and other library calls) that allow you to access the network functionality of a Unix box, or any box that supports the sockets API for that matter (BSD, Windows, Linux, Mac, what-have-you.) When you call one of these functions, the kernel takes over and does all the work for you automagically.
The place most people get stuck around here is what order to call these things in. In that, the man pages are no use, as you’ve probably discovered. Well, to help with that dreadful situation, I’ve tried to lay out the system calls in the following sections in exactly (approximately) the same order that you’ll need to call them in your programs.
That, coupled with a few pieces of sample code here and there, some milk and cookies (which I fear you will have to supply yourself), and some raw guts and courage, and you’ll be beaming data around the Internet like the Son of Jon Postel!
(Please note that for brevity, many code snippets below do not include necessary error checking. And they very commonly assume that the result from calls to getaddrinfo() succeed and return a valid entry in the linked list. Both of these situations are properly addressed in the stand-alone programs, though, so use those as a model.)
getaddrinfo()—Prepare to launch! This is a real workhorse of a function with a lot of options, but usage is actually pretty simple. It helps set up the structs you need later on.
A tiny bit of history: it used to be that you would use a function called gethostbyname() to do DNS lookups. Then you’d load that information by hand into a struct sockaddr_in, and use that in your calls.
This is no longer necessary, thankfully. (Nor is it desirable, if you want to write code that works for both IPv4 and IPv6!) In these modern times, you now have the function getaddrinfo() that does all kinds of good stuff for you, including DNS and service name lookups, and fills out the structs you need, besides!
Let’s take a look!
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
int getaddrinfo(const char *node, // e.g. "www.example.com" or IP
const char *service, // e.g. "http" or port number
const struct addrinfo *hints,
struct addrinfo **res);You give this function three input parameters, and it gives you a pointer to a linked-list, res, of results.
The node parameter is the host name to connect to, or an IP address.
Next is the parameter service, which can be a port number, like “80”, or the name of a particular service (found in The IANA Port List20 or the /etc/services file on your Unix machine) like “http” or “ftp” or “telnet” or “smtp” or whatever.
Finally, the hints parameter points to a struct addrinfo that you’ve already filled out with relevant information.
Here’s a sample call if you’re a server who wants to listen on your host’s IP address, port 3490. Note that this doesn’t actually do any listening or network setup; it merely sets up structures we’ll use later:
int status;
struct addrinfo hints;
struct addrinfo *servinfo; // will point to the results
memset(&hints, 0, sizeof hints); // make sure the struct is empty
hints.ai_family = AF_UNSPEC; // don't care IPv4 or IPv6
hints.ai_socktype = SOCK_STREAM; // TCP stream sockets
hints.ai_flags = AI_PASSIVE; // fill in my IP for me
if ((status = getaddrinfo(NULL, "3490", &hints, &servinfo)) != 0) {
fprintf(stderr, "getaddrinfo error: %s\n", gai_strerror(status));
exit(1);
}
// servinfo now points to a linked list of 1 or more struct addrinfos
// ... do everything until you don't need servinfo anymore ....
freeaddrinfo(servinfo); // free the linked-listNotice that I set the ai_family to AF_UNSPEC, thereby saying that I don’t care if we use IPv4 or IPv6. You can set it to AF_INET or AF_INET6 if you want one or the other specifically.
Also, you’ll see the AI_PASSIVE flag in there; this tells getaddrinfo() to assign the address of my local host to the socket structures. This is nice because then you don’t have to hardcode it. (Or you can put a specific address in as the first parameter to getaddrinfo() where I currently have NULL, up there.)
Then we make the call. If there’s an error (getaddrinfo() returns non-zero), we can print it out using the function gai_strerror(), as you see. If everything works properly, though, servinfo will point to a linked list of struct addrinfos, each of which contains a struct sockaddr of some kind that we can use later! Nifty!
Finally, when we’re eventually all done with the linked list that getaddrinfo() so graciously allocated for us, we can (and should) free it all up with a call to freeaddrinfo().
Here’s a sample call if you’re a client who wants to connect to a particular server, say “www.example.net” port 3490. Again, this doesn’t actually connect, but it sets up the structures we’ll use later:
int status;
struct addrinfo hints;
struct addrinfo *servinfo; // will point to the results
memset(&hints, 0, sizeof hints); // make sure the struct is empty
hints.ai_family = AF_UNSPEC; // don't care IPv4 or IPv6
hints.ai_socktype = SOCK_STREAM; // TCP stream sockets
// get ready to connect
status = getaddrinfo("www.example.net", "3490", &hints, &servinfo);
// servinfo now points to a linked list of 1 or more struct addrinfos
// etc.I keep saying that servinfo is a linked list with all kinds of address information. Let’s write a quick demo program to show off this information. This short program21 will print the IP addresses for whatever host you specify on the command line:
/*
** showip.c -- show IP addresses for a host given on the command line
*/
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
#include <arpa/inet.h>
#include <netinet/in.h>
int main(int argc, char *argv[])
{
struct addrinfo hints, *res, *p;
int status;
char ipstr[INET6_ADDRSTRLEN];
if (argc != 2) {
fprintf(stderr,"usage: showip hostname\n");
return 1;
}
memset(&hints, 0, sizeof hints);
hints.ai_family = AF_UNSPEC; // AF_INET or AF_INET6 to force version
hints.ai_socktype = SOCK_STREAM;
if ((status = getaddrinfo(argv[1], NULL, &hints, &res)) != 0) {
fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(status));
return 2;
}
printf("IP addresses for %s:\n\n", argv[1]);
for(p = res;p != NULL; p = p->ai_next) {
void *addr;
char *ipver;
// get the pointer to the address itself,
// different fields in IPv4 and IPv6:
if (p->ai_family == AF_INET) { // IPv4
struct sockaddr_in *ipv4 = (struct sockaddr_in *)p->ai_addr;
addr = &(ipv4->sin_addr);
ipver = "IPv4";
} else { // IPv6
struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)p->ai_addr;
addr = &(ipv6->sin6_addr);
ipver = "IPv6";
}
// convert the IP to a string and print it:
inet_ntop(p->ai_family, addr, ipstr, sizeof ipstr);
printf(" %s: %s\n", ipver, ipstr);
}
freeaddrinfo(res); // free the linked list
return 0;
}As you see, the code calls getaddrinfo() on whatever you pass on the command line, that fills out the linked list pointed to by res, and then we can iterate over the list and print stuff out or do whatever.
(There’s a little bit of ugliness there where we have to dig into the different types of struct sockaddrs depending on the IP version. Sorry about that! I’m not sure of a better way around it.)
Sample run! Everyone loves screenshots:
$ showip www.example.net
IP addresses for www.example.net:
IPv4: 192.0.2.88
$ showip ipv6.example.com
IP addresses for ipv6.example.com:
IPv4: 192.0.2.101
IPv6: 2001:db8:8c00:22::171Now that we have that under control, we’ll use the results we get from getaddrinfo() to pass to other socket functions and, at long last, get our network connection established! Keep reading!
socket()—Get the File Descriptor!I guess I can put it off no longer—I have to talk about the socket() system call. Here’s the breakdown:
#include <sys/types.h>
#include <sys/socket.h>
int socket(int domain, int type, int protocol); But what are these arguments? They allow you to say what kind of socket you want (IPv4 or IPv6, stream or datagram, and TCP or UDP).
It used to be people would hardcode these values, and you can absolutely still do that. (domain is PF_INET or PF_INET6, type is SOCK_STREAM or SOCK_DGRAM, and protocol can be set to 0 to choose the proper protocol for the given type. Or you can call getprotobyname() to look up the protocol you want, “tcp” or “udp”.)
(This PF_INET thing is a close relative of the AF_INET that you can use when initializing the sin_family field in your struct sockaddr_in. In fact, they’re so closely related that they actually have the same value, and many programmers will call socket() and pass AF_INET as the first argument instead of PF_INET. Now, get some milk and cookies, because it’s time for a story. Once upon a time, a long time ago, it was thought that maybe an address family (what the “AF” in “AF_INET” stands for) might support several protocols that were referred to by their protocol family (what the “PF” in “PF_INET” stands for). That didn’t happen. And they all lived happily ever after, The End. So the most correct thing to do is to use AF_INET in your struct sockaddr_in and PF_INET in your call to socket().)
Anyway, enough of that. What you really want to do is use the values from the results of the call to getaddrinfo(), and feed them into socket() directly like this:
int s;
struct addrinfo hints, *res;
// do the lookup
// [pretend we already filled out the "hints" struct]
getaddrinfo("www.example.com", "http", &hints, &res);
// again, you should do error-checking on getaddrinfo(), and walk
// the "res" linked list looking for valid entries instead of just
// assuming the first one is good (like many of these examples do).
// See the section on client/server for real examples.
s = socket(res->ai_family, res->ai_socktype, res->ai_protocol);socket() simply returns to you a socket descriptor that you can use in later system calls, or -1 on error. The global variable errno is set to the error’s value (see the errno man page for more details, and a quick note on using errno in multithreaded programs).
Fine, fine, fine, but what good is this socket? The answer is that it’s really no good by itself, and you need to read on and make more system calls for it to make any sense.
bind()—What port am I on? Once you have a socket, you might have to associate that socket with a port on your local machine. (This is commonly done if you’re going to listen() for incoming connections on a specific port—multiplayer network games do this when they tell you to “connect to 192.168.5.10 port 3490”.) The port number is used by the kernel to match an incoming packet to a certain process’s socket descriptor. If you’re going to only be doing a connect() (because you’re the client, not the server), this is probably unnecessary. Read it anyway, just for kicks.
Here is the synopsis for the bind() system call:
#include <sys/types.h>
#include <sys/socket.h>
int bind(int sockfd, struct sockaddr *my_addr, int addrlen);sockfd is the socket file descriptor returned by socket(). my_addr is a pointer to a struct sockaddr that contains information about your address, namely, port and IP address. addrlen is the length in bytes of that address.
Whew. That’s a bit to absorb in one chunk. Let’s have an example that binds the socket to the host the program is running on, port 3490:
struct addrinfo hints, *res;
int sockfd;
// first, load up address structs with getaddrinfo():
memset(&hints, 0, sizeof hints);
hints.ai_family = AF_UNSPEC; // use IPv4 or IPv6, whichever
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = AI_PASSIVE; // fill in my IP for me
getaddrinfo(NULL, "3490", &hints, &res);
// make a socket:
sockfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
// bind it to the port we passed in to getaddrinfo():
bind(sockfd, res->ai_addr, res->ai_addrlen);By using the AI_PASSIVE flag, I’m telling the program to bind to the IP of the host it’s running on. If you want to bind to a specific local IP address, drop the AI_PASSIVE and put an IP address in for the first argument to getaddrinfo().
bind() also returns -1 on error and sets errno to the error’s value.
Lots of old code manually packs the struct sockaddr_in before calling bind(). Obviously this is IPv4-specific, but there’s really nothing stopping you from doing the same thing with IPv6, except that using getaddrinfo() is going to be easier, generally. Anyway, the old code looks something like this:
// !!! THIS IS THE OLD WAY !!!
int sockfd;
struct sockaddr_in my_addr;
sockfd = socket(PF_INET, SOCK_STREAM, 0);
my_addr.sin_family = AF_INET;
my_addr.sin_port = htons(MYPORT); // short, network byte order
my_addr.sin_addr.s_addr = inet_addr("10.12.110.57");
memset(my_addr.sin_zero, '\0', sizeof my_addr.sin_zero);
bind(sockfd, (struct sockaddr *)&my_addr, sizeof my_addr);In the above code, you could also assign INADDR_ANY to the s_addr field if you wanted to bind to your local IP address (like the AI_PASSIVE flag, above). The IPv6 version of INADDR_ANY is a global variable in6addr_any that is assigned into the sin6_addr field of your struct sockaddr_in6. (There is also a macro IN6ADDR_ANY_INIT that you can use in a variable initializer.)
Another thing to watch out for when calling bind(): don’t go underboard with your port numbers. All ports below 1024 are RESERVED (unless you’re the superuser)! You can have any port number above that, right up to 65535 (provided they aren’t already being used by another program).
Sometimes, you might notice, you try to rerun a server and bind() fails, claiming “Address already in use.” What does that mean? Well, a little bit of a socket that was connected is still hanging around in the kernel, and it’s hogging the port. You can either wait for it to clear (a minute or so), or add code to your program allowing it to reuse the port, like this:
int yes=1;
//char yes='1'; // Solaris people use this
// lose the pesky "Address already in use" error message
if (setsockopt(listener,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof yes) == -1) {
perror("setsockopt");
exit(1);
} One small extra final note about bind(): there are times when you won’t absolutely have to call it. If you are connect()ing to a remote machine and you don’t care what your local port is (as is the case with telnet where you only care about the remote port), you can simply call connect(), it’ll check to see if the socket is unbound, and will bind() it to an unused local port if necessary.
connect()—Hey, you! Let’s just pretend for a few minutes that you’re a telnet application. Your user commands you (just like in the movie TRON) to get a socket file descriptor. You comply and call socket(). Next, the user tells you to connect to “10.12.110.57” on port “23” (the standard telnet port). Yow! What do you do now?
Lucky for you, program, you’re now perusing the section on connect()—how to connect to a remote host. So read furiously onward! No time to lose!
The connect() call is as follows:
#include <sys/types.h>
#include <sys/socket.h>
int connect(int sockfd, struct sockaddr *serv_addr, int addrlen); sockfd is our friendly neighborhood socket file descriptor, as returned by the socket() call, serv_addr is a struct sockaddr containing the destination port and IP address, and addrlen is the length in bytes of the server address structure.
All of this information can be gleaned from the results of the getaddrinfo() call, which rocks.
Is this starting to make more sense? I can’t hear you from here, so I’ll just have to hope that it is. Let’s have an example where we make a socket connection to “www.example.com”, port 3490:
struct addrinfo hints, *res;
int sockfd;
// first, load up address structs with getaddrinfo():
memset(&hints, 0, sizeof hints);
hints.ai_family = AF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
getaddrinfo("www.example.com", "3490", &hints, &res);
// make a socket:
sockfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
// connect!
connect(sockfd, res->ai_addr, res->ai_addrlen);Again, old-school programs filled out their own struct sockaddr_ins to pass to connect(). You can do that if you want to. See the similar note in the bind() section, above.
Be sure to check the return value from connect()—it’ll return -1 on error and set the variable errno.
Also, notice that we didn’t call bind(). Basically, we don’t care about our local port number; we only care where we’re going (the remote port). The kernel will choose a local port for us, and the site we connect to will automatically get this information from us. No worries.
listen()—Will somebody please call me? OK, time for a change of pace. What if you don’t want to connect to a remote host. Say, just for kicks, that you want to wait for incoming connections and handle them in some way. The process is two step: first you listen(), then you accept() (see below).
The listen() call is fairly simple, but requires a bit of explanation:
int listen(int sockfd, int backlog); sockfd is the usual socket file descriptor from the socket() system call. backlog is the number of connections allowed on the incoming queue. What does that mean? Well, incoming connections are going to wait in this queue until you accept() them (see below) and this is the limit on how many can queue up. Most systems silently limit this number to about 20; you can probably get away with setting it to 5 or 10.
Again, as per usual, listen() returns -1 and sets errno on error.
Well, as you can probably imagine, we need to call bind() before we call listen() so that the server is running on a specific port. (You have to be able to tell your buddies which port to connect to!) So if you’re going to be listening for incoming connections, the sequence of system calls you’ll make is:
I’ll just leave that in the place of sample code, since it’s fairly self-explanatory. (The code in the accept() section, below, is more complete.) The really tricky part of this whole sha-bang is the call to accept().
accept()—“Thank you for calling port 3490.” Get ready—the accept() call is kinda weird! What’s going to happen is this: someone far far away will try to connect() to your machine on a port that you are listen()ing on. Their connection will be queued up waiting to be accept()ed. You call accept() and you tell it to get the pending connection. It’ll return to you a brand new socket file descriptor to use for this single connection! That’s right, suddenly you have two socket file descriptors for the price of one! The original one is still listening for more new connections, and the newly created one is finally ready to send() and recv(). We’re there!
The call is as follows:
#include <sys/types.h>
#include <sys/socket.h>
int accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen); sockfd is the listen()ing socket descriptor. Easy enough. addr will usually be a pointer to a local struct sockaddr_storage. This is where the information about the incoming connection will go (and with it you can determine which host is calling you from which port). addrlen is a local integer variable that should be set to sizeof(struct sockaddr_storage) before its address is passed to accept(). accept() will not put more than that many bytes into addr. If it puts fewer in, it’ll change the value of addrlen to reflect that.
Guess what? accept() returns -1 and sets errno if an error occurs. Betcha didn’t figure that.
Like before, this is a bunch to absorb in one chunk, so here’s a sample code fragment for your perusal:
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
#define MYPORT "3490" // the port users will be connecting to
#define BACKLOG 10 // how many pending connections queue will hold
int main(void)
{
struct sockaddr_storage their_addr;
socklen_t addr_size;
struct addrinfo hints, *res;
int sockfd, new_fd;
// !! don't forget your error checking for these calls !!
// first, load up address structs with getaddrinfo():
memset(&hints, 0, sizeof hints);
hints.ai_family = AF_UNSPEC; // use IPv4 or IPv6, whichever
hints.ai_socktype = SOCK_STREAM;
hints.ai_flags = AI_PASSIVE; // fill in my IP for me
getaddrinfo(NULL, MYPORT, &hints, &res);
// make a socket, bind it, and listen on it:
sockfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
bind(sockfd, res->ai_addr, res->ai_addrlen);
listen(sockfd, BACKLOG);
// now accept an incoming connection:
addr_size = sizeof their_addr;
new_fd = accept(sockfd, (struct sockaddr *)&their_addr, &addr_size);
// ready to communicate on socket descriptor new_fd!
.
.
.Again, note that we will use the socket descriptor new_fd for all send() and recv() calls. If you’re only getting one single connection ever, you can close() the listening sockfd in order to prevent more incoming connections on the same port, if you so desire.
send() and recv()—Talk to me, baby!These two functions are for communicating over stream sockets or connected datagram sockets. If you want to use regular unconnected datagram sockets, you’ll need to see the section on sendto() and recvfrom(), below.
Here’s something that might (or might not) be new to you: these are blocking calls. That is,
recv()will block until there is some data ready to receive. “But what does ‘block’ mean, already?!” It means your program is going to stop there, on that system call, until someone sends you something. (The OS techie jargon for “stop” in that sentence is actually sleep, so I might use those terms interchangeably.)send()can also block if the stuff you’re sending is all jammed up somehow, but that’s rarer. We’ll revisit this concept later, and talk about how to avoid it when you need to.
Here’s the send() call:
int send(int sockfd, const void *msg, int len, int flags); sockfd is the socket descriptor you want to send data to (whether it’s the one returned by socket() or the one you got with accept()). msg is a pointer to the data you want to send, and len is the length of that data in bytes. Just set flags to 0. (See the send() man page for more information concerning flags.)
Some sample code might be:
char *msg = "Beej was here!";
int len, bytes_sent;
.
.
.
len = strlen(msg);
bytes_sent = send(sockfd, msg, len, 0);
.
.
. send() returns the number of bytes actually sent out—this might be less than the number you told it to send! See, sometimes you tell it to send a whole gob of data and it just can’t handle it. It’ll fire off as much of the data as it can, and trust you to send the rest later. Remember, if the value returned by send() doesn’t match the value in len, it’s up to you to send the rest of the string. The good news is this: if the packet is small (less than 1K or so) it will probably manage to send the whole thing all in one go. Again, -1 is returned on error, and errno is set to the error number.
The recv() call is similar in many respects:
int recv(int sockfd, void *buf, int len, int flags);sockfd is the socket descriptor to read from, buf is the buffer to read the information into, len is the maximum length of the buffer, and flags can again be set to 0. (See the recv() man page for flag information.)
recv() returns the number of bytes actually read into the buffer, or -1 on error (with errno set, accordingly).
Wait! recv() can return 0. This can mean only one thing: the remote side has closed the connection on you! A return value of 0 is recv()’s way of letting you know this has occurred.
There, that was easy, wasn’t it? You can now pass data back and forth on stream sockets! Whee! You’re a Unix Network Programmer!
sendto() and recvfrom()—Talk to me, DGRAM-style“This is all fine and dandy,” I hear you saying, “but where does this leave me with unconnected datagram sockets?” No problemo, amigo. We have just the thing.
Since datagram sockets aren’t connected to a remote host, guess which piece of information we need to give before we send a packet? That’s right! The destination address! Here’s the scoop:
int sendto(int sockfd, const void *msg, int len, unsigned int flags,
const struct sockaddr *to, socklen_t tolen); As you can see, this call is basically the same as the call to send() with the addition of two other pieces of information. to is a pointer to a struct sockaddr (which will probably be another struct sockaddr_in or struct sockaddr_in6 or struct sockaddr_storage that you cast at the last minute) which contains the destination IP address and port. tolen, an int deep-down, can simply be set to sizeof *to or sizeof(struct sockaddr_storage).
To get your hands on the destination address structure, you’ll probably either get it from getaddrinfo(), or from recvfrom(), below, or you’ll fill it out by hand.
Just like with send(), sendto() returns the number of bytes actually sent (which, again, might be less than the number of bytes you told it to send!), or -1 on error.
Equally similar are recv() and recvfrom(). The synopsis of recvfrom() is:
int recvfrom(int sockfd, void *buf, int len, unsigned int flags,
struct sockaddr *from, int *fromlen); Again, this is just like recv() with the addition of a couple fields. from is a pointer to a local struct sockaddr_storage that will be filled with the IP address and port of the originating machine. fromlen is a pointer to a local int that should be initialized to sizeof *from or sizeof(struct sockaddr_storage). When the function returns, fromlen will contain the length of the address actually stored in from.
recvfrom() returns the number of bytes received, or -1 on error (with errno set accordingly).
So, here’s a question: why do we use struct sockaddr_storage as the socket type? Why not struct sockaddr_in? Because, you see, we want to not tie ourselves down to IPv4 or IPv6. So we use the generic struct sockaddr_storage which we know will be big enough for either.
(So… here’s another question: why isn’t struct sockaddr itself big enough for any address? We even cast the general-purpose struct sockaddr_storage to the general-purpose struct sockaddr! Seems extraneous and redundant, huh. The answer is, it just isn’t big enough, and I’d guess that changing it at this point would be Problematic. So they made a new one.)
Remember, if you connect() a datagram socket, you can then simply use send() and recv() for all your transactions. The socket itself is still a datagram socket and the packets still use UDP, but the socket interface will automatically add the destination and source information for you.
close() and shutdown()—Get outta my face!Whew! You’ve been send()ing and recv()ing data all day long, and you’ve had it. You’re ready to close the connection on your socket descriptor. This is easy. You can just use the regular Unix file descriptor close() function:
close(sockfd); This will prevent any more reads and writes to the socket. Anyone attempting to read or write the socket on the remote end will receive an error.
Just in case you want a little more control over how the socket closes, you can use the shutdown() function. It allows you to cut off communication in a certain direction, or both ways (just like close() does). Synopsis:
int shutdown(int sockfd, int how); sockfd is the socket file descriptor you want to shutdown, and how is one of the following:
how |
Effect |
|---|---|
0 |
Further receives are disallowed |
1 |
Further sends are disallowed |
2 |
Further sends and receives are disallowed (like close()) |
shutdown() returns 0 on success, and -1 on error (with errno set accordingly).
If you deign to use shutdown() on unconnected datagram sockets, it will simply make the socket unavailable for further send() and recv() calls (remember that you can use these if you connect() your datagram socket).
It’s important to note that shutdown() doesn’t actually close the file descriptor—it just changes its usability. To free a socket descriptor, you need to use close().
Nothing to it.
(Except to remember that if you’re using Windows and Winsock that you should call closesocket() instead of close().)
getpeername()—Who are you?This function is so easy.
It’s so easy, I almost didn’t give it its own section. But here it is anyway.
The function getpeername() will tell you who is at the other end of a connected stream socket. The synopsis:
#include <sys/socket.h>
int getpeername(int sockfd, struct sockaddr *addr, int *addrlen); sockfd is the descriptor of the connected stream socket, addr is a pointer to a struct sockaddr (or a struct sockaddr_in) that will hold the information about the other side of the connection, and addrlen is a pointer to an int, that should be initialized to sizeof *addr or sizeof(struct sockaddr).
The function returns -1 on error and sets errno accordingly.
Once you have their address, you can use inet_ntop(), getnameinfo(), or gethostbyaddr() to print or get more information. No, you can’t get their login name. (Ok, ok. If the other computer is running an ident daemon, this is possible. This, however, is beyond the scope of this document. Check out RFC 141322 for more info.)
gethostname()—Who am I? Even easier than getpeername() is the function gethostname(). It returns the name of the computer that your program is running on. The name can then be used by getaddrinfo(), above, to determine the IP address of your local machine.
What could be more fun? I could think of a few things, but they don’t pertain to socket programming. Anyway, here’s the breakdown:
#include <unistd.h>
int gethostname(char *hostname, size_t size); The arguments are simple: hostname is a pointer to an array of chars that will contain the hostname upon the function’s return, and size is the length in bytes of the hostname array.
The function returns 0 on successful completion, and -1 on error, setting errno as usual.