Prev | Contents | Next

22 <stdint.h> More Integer Types

This header gives us access to (potentially) types of a fixed number of bits, or, at the very least, types that are at least that many bits.

It also gives us handy macros to use.

22.1 Specific-Width Integers

There are three main classes of types defined here, signed and unsigned:

Where the N occurs, you substitute the number of bits, commonly multiples of 8, e.g. uint16_t.

The following types are guaranteed to be defined:

int_least8_t      uint_least8_t
int_least16_t     uint_least16_t
int_least32_t     uint_least32_t
int_least64_t     uint_least64_t

int_fast8_t       uint_fast8_t
int_fast16_t      uint_fast16_t
int_fast32_t      uint_fast32_t
int_fast64_t      uint_fast64_t

Everything else is optional, but you’ll probably also have the following, which are required when a system has integers of these sizes with no padding and two’s-complement representation… which is the case for Macs and PCs and a lot of other systems. In short, you very likely have these:

int8_t      uint8_t
int16_t     uint16_t
int32_t     uint32_t
int64_t     uint64_t

Other numbers of bits can also be supported by an implementation if it wants to go all crazy with it.

Examples:

#include <stdint.h>

int main(void)
{
    int16_t x = 32;
    int_fast32_t y = 3490;

    // ...

22.2 Other Integer Types

There are a couple optional types that are integers capable of holding pointer types.

intptr_t
uintptr_t

You can convert a void* to one of these types, and back again. And the void*s will compare equal.

The use case is any place you need an integer that represents a pointer for some reason.

Also, there are a couple types that are just there to be the biggest possible integers your system supports:

intmax_t
uintmax_t

Fun fact: you can print these types with the "%jd" and "%ju" printf() format specifiers.

There are also a bunch of macros in <inttypes.h>(#inttypes) that you can use to print any of the types mentioned, above.

22.3 Macros

The following macros define the minimum and maximum values for these types:

INT8_MAX           INT8_MIN           UINT8_MAX
INT16_MAX          INT16_MIN          UINT16_MAX
INT32_MAX          INT32_MIN          UINT32_MAX
INT64_MAX          INT64_MIN          UINT64_MAX

INT_LEAST8_MAX     INT_LEAST8_MIN     UINT_LEAST8_MAX
INT_LEAST16_MAX    INT_LEAST16_MIN    UINT_LEAST16_MAX
INT_LEAST32_MAX    INT_LEAST32_MIN    UINT_LEAST32_MAX
INT_LEAST64_MAX    INT_LEAST64_MIN    UINT_LEAST64_MAX

INT_FAST8_MAX      INT_FAST8_MIN      UINT_FAST8_MAX
INT_FAST16_MAX     INT_FAST16_MIN     UINT_FAST16_MAX
INT_FAST32_MAX     INT_FAST32_MIN     UINT_FAST32_MAX
INT_FAST64_MAX     INT_FAST64_MIN     UINT_FAST64_MAX

INTMAX_MAX         INTMAX_MIN         UINTMAX_MAX

INTPTR_MAX         INTPTR_MIN         UINTPTR_MAX

For the exact-bit-size signed types, the minimum is exactly \(-(2^{N-1})\) and the maximum is exactly \(2^{N-1}-1\). And for the exact-bit-size unsigned types, the max is exactly \(2^N-1\).

For the signed “least” and “fast” variants, the magnitude and sign of the minimum is at least \(-(2^{N-1}-1)\) and the maximum is at least \(2^{N-1}-1\). And for unsigned it’s at least \(2^N-1\).

INTMAX_MAX is at least \(2^{63}-1\), INTMAX_MIN is at least \(-(2^{63}-1)\) in sign and magnitude. And UINTMAX_MAX is at least \(2^{64}-1\).

Finally, INTPTR_MAX is at least \(2^{15}-1\), INTPTR_MIN is at least \(-(2^{15}-1)\) in sign and magnitude. And UINTPTR_MAX is at least \(2^{16}-1\).

22.4 Other Limits

There are a bunch of types in <inttypes.h>(#inttypes) that have their limits defined here. (<inttypes.h> includes <stdint.h>.)

Macro Description
PTRDIFF_MIN Minimum ptrdiff_t value
PTRDIFF_MAX Maximum ptrdiff_t value
SIG_ATOMIC_MIN Minimum sig_atomic_t value
SIG_ATOMIC_MAX Maximum sig_atomic_t value
SIZE_MAX Maximum size_t value
WCHAR_MIN Minimum wchar_t value
WCHAR_MAX Maximum wchar_t value
WINT_MIN Minimum wint_t value
WINT_MAX Maximum wint_t value

The spec says that PTRDIFF_MIN will be at least -65535 in magnitude. And PTRDIFF_MAX and SIZE_MAX will be at least 65535.

SIG_ATOMIC_MIN and MAX will be either -127 and 127 (if it’s signed) or 0 and 255 (if it’s unsigned).

Same for WCHAR_MIN and MAX.

WINT_MIN and MAX will be either -32767 and 32767 (if it’s signed) or 0 and 65535 (if it’s unsigned).

22.5 Macros for Declaring Constants

If you recall, you can specify a type for integer constants:

int x = 12;
long int y = 12L;
unsigned long long int z = 12ULL;

You can use the macros INTN_C() and UINTN() where N is 8, 16, 32 or 64.

uint_least16_t x = INT16_C(3490);
uint_least64_t y = INT64_C(1122334455);

A variant on these is INTMAX_C() and UINTMAX_C(). They will make a constant suitable for storing in an intmax_t or uintmax_t.

intmax_t x = INTMAX_C(3490);
uintmax_t x = UINTMAX_C(1122334455);
Prev | Contents | Next